Ask Experts Questions for FREE Help !
Ask
    booter's Avatar
    booter Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 23, 2008, 07:12 PM
    Opening my port
    How do I open my port on my router for a netgear wgt624 :( :(
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
    		  
    #2

    Jul 24, 2008, 08:51 AM
    There have been several versions of this device as indicated on the sticker on the device. The Manual for v1 covers port forwarding in chapter 6. If you have a later version, visit the support section at Netgear and download the manual appropriate for your device version.
    NeedKarma's Avatar
    NeedKarma Posts: 10,635, Reputation: 1706
    Uber Member
    		  
    #3

    Jul 24, 2008, 08:53 AM
    You can start with the holy site of port forwarding: PortForward.com - Free Help Setting up Your Router or Firewall

    And here: Port Forwarding for the Netgear WGT624
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Modem com port 4 [ 4 Answers ]

I have come across this problem a few times but can never remember how I fixed it. My modem is installing on COM port 4, I only have COM port 1 and 2. I have NO resource conflicts, have uninstalled and reinstalled many times with the same result. Thanks Dan

Opening (charitable?) thrift store in Port St. Lucie, FL [ 2 Answers ]

I want to start a thrift store in Port St. Lucie, FL. I would like to consider the possibility of it having a charitable component. Where can I find detailed information about the specific requirements for opening a charitable thrift store here, in Port St. Lucie, FL?

Replace data/fax port with firewire port [ 2 Answers ]

I want to buy a dell inspiron 531 computer from costco. It has a TV tuner and a 56K PCI Data/Fax Modem. I know the TV tuner uses one of the two available pci slots, but does a data/fax modem use anothwer pci slot? I want to have an open pci slot so I can add a firewire port. If the data/fax uses a...

USB Adaptor in PS/2 Port [ 6 Answers ]

Hello, I have a Fujitsu laptop running Win 98SE and it does not have any USB ports. I have this adaptor that allows me to convert a PS/2 port into a USB port for plugging USB peripherals in. I've run hardware scans, restarted the computer, etc. and I can't get it to recognize the USB adaptor...

View more questions Search