 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Luxaire furnace troubleshooting
Luxaire propane furnace.. 4yrs old.
Following a power outage... the furnace pre blower comes on fan comes on but no heat. Furnace is flashing 3 flashes . Filter is clean and blower motor seems to work on fan. Any thoughts.. Thanks Greg |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
As far as I can tell I have an ignitor problem. Works intermittantly. Filter is clean, pre-blower activates appropriately and IF ingnitor comes on, then the gas ignites and all is well. Thoughts?
I have a 2334 sg. Foot log home it has 2 3.50 ton units 1 of the units runs twice as much as the other.these are brand new units been in house less than year.Had the heat and air company back out to my house 4 times can't really tell me why they have closed down some vents at units didn't really...
My outside furnace will come on but no heat its like a valve is stuck. If I give the flow valve a slight tap on the bottom the furnace will light up, but when the thermostat reaches temp and turns off the start up has to be repeate. Sometimes it does fine , but rite now it won't even try to run...
Our luxaire is a high efficiency model and frequently will shot off before the requested temperature is reached. We just had the "Initiator Motor" (power vent motor) replaced because it seized up. I thought the issue was related but it is not. The problem happens several times/day. If I shut...
I am in the third heating season with my Luxaire system. One of my units stopped blowing air and if I swith it to manual, it still does not initiate the blower. The burners fire up and burn for about a minute but the blower does not start and the burners shut off. What controls the blower...
View more questions Search
|
