Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Luxaire troubleshooting
[ 1 Answers ]
My outside furnace will come on but no heat its like a valve is stuck. If I give the flow valve a slight tap on the bottom the furnace will light up, but when the thermostat reaches temp and turns off the start up has to be repeate. Sometimes it does fine , but rite now it won't even try to run...
Luxaire troubleshooting
[ 0 Answers ]
Our luxaire is a high efficiency model and frequently will shot off before the requested temperature is reached. We just had the "Initiator Motor" (power vent motor) replaced because it seized up. I thought the issue was related but it is not. The problem happens several times/day. If I shut...
Luxaire troubleshooting
[ 0 Answers ]
Within the last couple of days, the blower will not shut off. You can hear it shut off momentarily and within a second or two turn on again. I am able to shut the actual heat off using the thermostat, but that does not affect the blower. I can turn the entire unit off using the switch on the side...
Luxaire troubleshooting
[ 6 Answers ]
I am in the third heating season with my Luxaire system. One of my units stopped blowing air and if I swith it to manual, it still does not initiate the blower. The burners fire up and burn for about a minute but the blower does not start and the burners shut off. What controls the blower...
Luxaire troubleshooting
[ 2 Answers ]
My LuxAire furnace runs intermitently but sometimes just cuts off and doesn't start again, then if I cut off the power and reconnect it the furnace starts for awhile. I am getting a code of seven blinks. It seems to run for awhile but nothing is consisitant? Please! View more questions Search
|