Ask Experts Questions for FREE Help !
Ask
    dbnpd165's Avatar
    dbnpd165 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 17, 2010, 02:08 PM
    Luxaire furnace troubleshooting
    As far as I can tell I have an ignitor problem. Works intermittantly. Filter is clean, pre-blower activates appropriately and IF ingnitor comes on, then the gas ignites and all is well. Thoughts?

Check out some similar questions!

Luxaire troubleshooting [ 9 Answers ]

Hello. I am hoping somecan can give some ideas for a fix. I just had a brand new Luxaire 95% + gas furnace installed in my home. Intermitantly I get the 4 red flashes error, the heat turns off and the blower stays on. Sometimes it corrects itself and fires up again while attempting to satisfy the...

Luxaire troubleshooting [ 3 Answers ]

Are luxaire furnice fires up than the gas shuts off and blows cold air,turnit off and on the switch on it might work right sometimes. Ireplaaced the ignighter aand it did not make any diff.

Luxaire furnace troubleshooting [ 1 Answers ]

I have a 2334 sg. Foot log home it has 2 3.50 ton units 1 of the units runs twice as much as the other.these are brand new units been in house less than year.Had the heat and air company back out to my house 4 times can't really tell me why they have closed down some vents at units didn't really...

Luxaire troubleshooting [ 6 Answers ]

I am in the third heating season with my Luxaire system. One of my units stopped blowing air and if I swith it to manual, it still does not initiate the blower. The burners fire up and burn for about a minute but the blower does not start and the burners shut off. What controls the blower...

Luxaire troubleshooting [ 0 Answers ]

Preasure switch stuck open how do you get it unstuck


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.