Ask Experts Questions for FREE Help !
Ask
    EMERIL LAGASSE's Avatar
    EMERIL LAGASSE Posts: 101, Reputation: 4
    Junior Member
    		  
    #1

    Mar 5, 2010, 05:37 AM
    Bifold jamb detail
    Need a detail or drawing for a ½ jamb and casing for bi fold doors
    Thanks
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Mar 5, 2010, 03:10 PM

    Are u putting in a 2 door unit or 4 door unit?

    What do u mean by "1/2 jamb"?

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hanging bifold doors [ 1 Answers ]

I am hanging bifold doors in a closet. What spacing do I need on the sides and in the center ? How much space on the top and the bottom if I have hardwood floors?

Hanging bifold doors [ 4 Answers ]

Since bifold doors do not come pre-hung, what size wood is best needed to create a finished door opening?

18" bifold doors [ 1 Answers ]

Where can I find some of these bad boys? Each door panel is appx 9". Specifically looking for unfinished, full louvered that we will stain and poly to replace existing nasty painted ones in a small condo.

Window jamb is not plumb, how do I trim inside? [ 2 Answers ]

I am finishing a walkout basement, and realized one window jamb is out of plumb by about 1/2": the bottom sticks out to be flush with sheetrock inside, but the top is flush with the framing. The top tips toward the outside. The wall is plumb on the inside but not on the outside. I suspect the...

New door and jamb? EXTERIOR [ 4 Answers ]

I have a 1920"s stucco home. They still have I believe, possibly the original doors. My wife wants new doors,so do I. I want to attempt to buy replacement doors with jams attached. I didn't remove anything yet,but measured jam thickness of old doors. It is larger then doors at Home Depot. ...

View more questions Search