 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How many doors are in your bifold unit? If u are replacing sliding doors with bifold, the doors will have to be cut. The finished width opening for a 4 door unit is minimum of 5/8'' larger then door unit. The length of doors is 3/4''less then space between top track and bottom mount. The space between doors 2 and 3 is about 1/8'' Good luck Chuck |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Cannot adjust shower doors to align correctly because shower walls aren't plumb... the shower bypass doors/rails etc are level and plumb but they leave gaps because the wall of the shower isn't plumb... any way to correct that enough to align the doors? Out of plumb appx 1/8 " on both sides. ...
Since bifold doors do not come pre-hung, what size wood is best needed to create a finished door opening?
I recently put in a bifold on a laundry/closet. The opening was exact = 36". It was pretty darn hard trying to get the bifold door to fit even though the directions called for that size. It was and is very tight. Now I'm ready to do the same thing on two recently built clothes closets. The...
Where can I find some of these bad boys? Each door panel is appx 9". Specifically looking for unfinished, full louvered that we will stain and poly to replace existing nasty painted ones in a small condo.
I am toying with the idea of installing bifold doors in an opening that presently has sliding doors. The problem is that the width of the opening is 9 feet. Four 27" doors won't work because they'll protude too far into the room when closed. Is there hardware available to hang 6 doors, 3 on each...
View more questions Search
|
