 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I recently had problem of water leaking from the shower area. The technician who came to check it out says the shower drain strainer need to be replaced. My questions are: (1) He says in order to replace the drain strainer he has to cut a hole below the floor in order to reach it. Isn't the...
I recently had a real clog and backup in my stall shower. I have a drain strainer with no screws. I read somewhere that there is a special plumbing tool that goes into the holes of the strainer to unscrew it. I hesitate because I don't want to compromise the seal(if there is one) Or is it the...
Hello, I've been having some trouble lately with a persistent drain odor coming from the shower drain in our master bathroom. I've been trying to remove the drain strainer so I can access and clean out the vertical drain pipe/ tailpiece, but I haven't had much luck. Since there are no screws for...
First time poster. Looking for a strong (brass?) shower strainer replacement. Original is 3-1/2" diameter with 2 screws 2-3/4" apart on center. Chrome finish. Bought a replacement at Orchard Supply Hardware - but the strainer dented the first time I stepped on it. Don't know the...
Our tiled in shower in the basement has a very rusty drain strainer (and rusty drain underneath it). I've looked for a replacement strainer, but none of them comes large enough to fit. The old strainer is 5 7/8 " in diameter. It has OLYMPIC stamped on it. Can I find a replacement? If not, do...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
