Ask Experts Questions for FREE Help !
Ask
    paulhaltam's Avatar
    paulhaltam Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 27, 2010, 06:30 AM
    My boiler is running at a high pressure
    My bolier is at 1 bar but after the heating
    Has run for a bit the pressure builds up to 3 bar, somebody has told me it may be the pressure vessle that need re pressuring back to 1 bar! Can sombody asvise if this correct!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 27, 2010, 08:44 AM
    Put the question in PSI or elevation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

High pressure running with Combi boiler and leaking water... [ 0 Answers ]

Hi, My combi boiler runs at high pressure and keeps leeking water; it has trv valves on each radiator is there anywhere else there could be a blockage causing it? Regards Simon

Boiler has high pressure [ 1 Answers ]

By boiler is reading the maximum pressure and I am not sure how to release the pressure if you know please let me know thanks stevie

Gas boiler high pressure [ 1 Answers ]

I have an 80-year-old house in which I replaced the gas furnace in 1995. In a routine seasonal check up a contractor has told me that the pressure is running too high. The pressure went up to 30 PSI at 150 degrees Fahrenheit. Later in the day the pressure was found to be 22 PSI at 120 degrees F....

High efficiency boiler [ 1 Answers ]

If a customer complains about hot water performance what would be your first check

View more questions Search