 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman presidential ii blower not working
I live in an older mobile home and have a coleman presidential II furnace. When I turn it on, the pilot is lit and it produces heat, but the blower is very loud like banging. The impeller (?) the round thing that spins seems to be hitting the sides. There is nothing holding it to the shaft. The air is not blowing through the vents. Am I missing a piece to hold it together? Would this cause the heat to not be forced through my vents? How do I fix this?
|
||||
Check out some similar questions!
Coleman presidential II natural gas furnace. When burner lights the blower doesn't stay running, It cycles on and off every 2 or 3 seconds.
Hello all, I just moved into a mobile home with a Coleman Presidential 2 electric furnace. The elements are getting red hot and the fan isn't coming on. What I noticed is the elements reach a brightness of red becoming very hot and then cool down. After a few seconds they get hot again without...
The blower fan on my electric furnace will not shut off without tripping the main breaker switch. It is an older furnace that had not been used all too often as I generally use a wood/coal stove for heating, but had been operating properly when I have used it. The last time it was used , the...
I have a Coleman Pres. 2 electric furnace(20KW) mdl#3120-751.The blower will only run @ slow speed and will not run @ high after warm up. The heat strips are clean and seem to work as the unit produces heat but @ very low CFM. Not sure what and how to test.Any help appreciated!
Hi I have a coleman electric presidential II furnace serial #117960300 model# 3123B750blower #3123A590 when I turn the heat on it will heat and work fine but then the blower stops and the heat keeps heating it gets very hot and I have to trip the breaker to turn it off can any one help me thank you...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
