Check out some similar questions!
Coleman furnace 3500A816 blower runs continuiously
[ 1 Answers ]
I have replaced the sequencer. The heating elements cut when thermostat temperature is reached but the fan never cuts off. It will change speeds if I turn switch from heat to AC. What could cause this?
Lennox Furnace fan only runs on slow speed in heating mode
[ 4 Answers ]
I hope someone out there can help me under the control logic and components on my 1994 Lennox G20RE gas furnace. My fan runs at normal speed when it runs alone. When the furnace is in the "heat" mode, the fan only runs at minimum speed. It then overheats and begins to smell like it's burning up....
Coleman hvac blower runs continuously.
[ 3 Answers ]
We have a 1998 mobile home with a coleman hvac. For the past 6 months the blower has not turned off even though the air itself has? Does anyone have any suggestions to what might be causing this?
Running blower at slow speed all the time, and high when compressor runs.
[ 1 Answers ]
I have a Carrier 58PAV090 furnace air handler. The fan has multiple leads which are used to run the blower at different speeds. The black is for High speed, yellow for medium high, blue for medium low and red for low. In the cooling mode, the blower turns on when the thermostat calls for cooling...
Blower motor only runs in low speed
[ 1 Answers ]
Im running my air conditioning and my blower motor is only running in low speed. I have a american standard furnace model no. ud080c936j I came home from work and the house was hot so I went to turn on the air but it was already on. So I went down to check the furnace and the blower wasn't... View more questions Search
Add your answer here.
|