 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I just has a gas line installed for a gas stove. They performed the pressure test and the inspection was approved. The gage was left on and 4 days later the pressure has dropped to 4lbs. Is this a problem? The gas line was ran outside along the foundatio, then puched through the wall into the...
Need to test 7 new gas lines before inspection. However, would like to have it done Simultaneously. I have the compresor and 7 gauges. They are connected to 3/4" nipples that is connected to the 11/2" lines. I undrestand that a manifold aperatus could be implemented. If so need the line items to...
I am pressure testing the drain and vent stack in a new construction and want to know if there is any initial drop in pressure and is 5psi enough to test the system with.Also how long should it stay pressurized.
Who should I call for pressure testing for gas leakage in my house in Seattle, WA Thanks.
I am installing a new LP gas line into my basement. I have the line run and have a pressure tester connected to the line. I am getting conflicting info on the pressure and time I need to test to. I found an old thread (Aug 2005) on this forum that said 10 psi for 15 minutes. I also found a City...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
