Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pressure Testing an new underground gas line
[ 16 Answers ]
Hi all, I am in the process of adding a new coated 1/2" natural gas line underground to a patio area. I wanted to pressure test it before I bury it and I cannot seem to find the leak. I have a gas pressure valve from Home Crapo that goes up to 15psi. I filled the pipes up with this on and...
Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c
[ 1 Answers ]
Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading
Pressure testing gas line
[ 3 Answers ]
I am installing a new LP gas line into my basement. I have the line run and have a pressure tester connected to the line. I am getting conflicting info on the pressure and time I need to test to. I found an old thread (Aug 2005) on this forum that said 10 psi for 15 minutes. I also found a City...
Waste system pressure testing
[ 2 Answers ]
What is the best way to air pressure test a new pvc waste/vent line? The plumbing inspector wants it air tested @ 5 psi for 15 minutes. This is the rough plumbing for a second floor addition, so I've glued all the pvc, but have not glued the connections to the main soil stack or to the main...
Low water pressure in an area known for high pressure
[ 3 Answers ]
Greetings, My wife and I are in the process of updating 1957 side by side split level. The previous owner (OK, my Mom as I bought the house I grew up in from her) said that when they moved in they had to install a pressure reducer into the line. I have searched high and low but, I can't see... View more questions Search
|