 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman furnace evcon eb23b
I have a Colman Evcon Electric Furnace and only one heat element works is the one that turns the fan on. I have checked the elements, limit sw,and voltages and are OK. At the equencers none but the one is on. There are two squencers can't tell the timing and has a blend air system. What is wrong ? Model EB23B.
|
||||
|
||||
|
It is possible the other sequencer has failed. Below is a link to a mobile home site. They are good with Coleman. Sign in and post under Coleman. They will help you out.
Index page |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My husband just replaced our thermostat and he is unable to find the correct setting for the anticipator. Would you happen to know what this should be set on? Thanks!
Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.
My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...
We have a Coleman Evcon DLAS075BDD furnace which keeps displaying error codes: 1-Ignition Failure and 4-Limit cycling. We have replaced the circuit board. Inspected the ignitor and the flame sensor and both appear good. Also have taken the exhaust vent/hood off and vaccuumed out any rust to...
I have a coleman evcon direct vent forced air furnace, the air is blowing cool air, everythinig else is working it's firing ,the fan is working
View more questions Search
|
