 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman gmpn080-4
Furnace will sit with induction fan running but will not cycle. No codes in furnace and it will sometimes start and sometimes not. New board has been installed and none of the limit switches are out. Very hard to figure out. More noticeable when its cold.
|
||||
Check out some similar questions!
I have a goodman gmpn0804 furnace that will not ignite (and the igniter is good) . The inducer motor runs, gas valve comes on, no ignition, gas valve shuts down . If I manually reset the furnace (turning the power off then back on) ? The furnace will lite, cycle several times it may run perfectly...
Led light always on. Furnace will not do a thing
Furnace turns on the igniter glows but does not ignite (the gas valve is not turning on) it does this 3 times before turning off the circuit board blinks 1 time.. I replaced the flame sensor and it still does the same thing checked the gas valve and its not getting 24volts to it.. anybody have any...
Have a goodman model gmpn080-4 I lost blower limit pressure switch previously and seemed to be the same thing, ordered part and still does same thing. Thought it may have had a vacuum leak so I sealed the edges, as long as it is not connected (securely) to the exhaust pipe it runs fine. As soon as...
I'm shopping for a new forced air furnace. The lowest price I have is for a high efficiency furnace made by Goodman. Never heard of this manufacturer. What is the quality rating for Goodman high efficiency furnaces? Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
