 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Our house was built in 1966; we purchased it 3 months ago. Most of the plumbing is newer w/black pvc for sewage etc. Recently, I was under the house checking things and making sure all is going to be good for the winter. Here is what I found. The galvanized pipes under the kitchen area that...
Can "CuraFlo" epoxy pipe lining be used for protecting galvanized pipe for gas use?
I had a leak in my cold water feed which happens to be galvanized pipe. It was between 2 floors and I cut out the affected section. I am going to replace the cut out section with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...
Why is galvanised pipe not a good idea in a house? Why should it be removed? When was code written to outlaw it? Thanks, ewalk
http://mysite.verizon.net/fdraw/pipe.jpg Rusted galvanized pipe nipple is stuck in fitting in wall behind tile under bathroom sink. :( I have tried to remove it with a large pipe wrench, but it won't turn. I looking for any suggestions to get it out without damaging threads in fitting; WD40?...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
