Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing galvanized steel drain pipe
[ 12 Answers ]
I am truly desperate for some suggestions or reassurance concerning a plumbing issue we are having. Our home is 50 years old and the washing machine drain overflows each time we do a load of laundry. I have read your suggestions for a utility sink to act as a resivour tank but my husband doesn't...
Galvanized pipe to either Copper/CPVC pipe
[ 14 Answers ]
I had a leak in my cold water feed which happens to be galvanized pipe. It was between 2 floors and I cut out the affected section. I am going to replace the cut out section with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...
Replacing galvanized water tank
[ 1 Answers ]
I have a galvanized water tank that I would like to change to a pressurized tank. The pump was changed some years ago from a jet pump to a submersable pump. The current tank is 20" dia. and 60"hgt. The pressure switch is set to go on at 30 and off at 50 What size pressurized tank should I use...
Replacing Galvanized Drain Section
[ 1 Answers ]
I'm in an older house and need to replace a section of pipe draining from the kitchen sink. Two caveats that are relevant, however: 1. There are clearly two different types of pipe. One is darker (I assume galvanized steel), one is lighter, almost like aluminum. Both have corroded to the point...
Galvanized Pipe Stuck
[ 4 Answers ]
http://mysite.verizon.net/fdraw/pipe.jpg Rusted galvanized pipe nipple is stuck in fitting in wall behind tile under bathroom sink. :( I have tried to remove it with a large pipe wrench, but it won't turn. I looking for any suggestions to get it out without damaging threads in fitting; WD40?... View more questions Search
|