Ask Experts Questions for FREE Help !
Ask
    marvin10's Avatar
    marvin10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2010, 11:34 AM
    Trane xe80 manual
    My xe80 will not start, nothing. The code from the control unit blinks 3 times and the legend tells me there is a "Pressure Switch Problem." What can I do to repair it?
    Marvin [email protected]
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 24, 2010, 01:02 PM

    Hi marvin, until an expert comes along to answer, I would check the little tube going to the pressure switch for blockage, take it off a blow through it. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xe80 - no heat [ 1 Answers ]

My Trane XE80 will ingnite, shut off, ignite, shut off. Cleaned the flame sensor and still have problem that blower motor doesn't come on, but it sounds like it is trying to come on. Could this be the startup capacitor? Also found the diagnostic light - which gives 4 blinks, indicating "Thermal...

Trane xe80 manual [ 0 Answers ]

My Trane XE80 will ingnite, shut off, ignite, shut off. Cleaned the flame sensor and still have problem that blower motor doesn't come on, but it sounds like it is trying to come on. Could this be the startup capacitor? Also found the diagnostic light - which gives 4 blinks, indicating...

Trane XE80 [ 1 Answers ]

My 10 year old Trane XE80 in my woodworking shop lately cannot put out enough heat to satisfy the thermostat, which yesterday was set at 72 degrees on a 37 degree day. The steel building is completely insulated, and this has never happened before at this outside temperature. The furnace seems to...

Trane XE80 Won't ignite [ 4 Answers ]

My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?

Trane XE80 Won't Start [ 1 Answers ]

My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?

View more questions Search