My xe80 will not start, nothing. The code from the control unit blinks 3 times and the legend tells me there is a "Pressure Switch Problem." What can I do to repair it?
Marvin [email protected]
![]() |
My xe80 will not start, nothing. The code from the control unit blinks 3 times and the legend tells me there is a "Pressure Switch Problem." What can I do to repair it?
Marvin [email protected]
Hi marvin, until an expert comes along to answer, I would check the little tube going to the pressure switch for blockage, take it off a blow through it. Good luck
All times are GMT -7. The time now is 01:50 AM. |