Ask Experts Questions for FREE Help !
Ask
    Scott Oklahoma's Avatar
    Scott Oklahoma Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2010, 03:39 PM
    Pump calulations
    Need to know how to calculate pump specifications and recommended pipe size for 100 gal minute a distance of 300 feet with a vertical rise of 40 feet.

Check out some similar questions!

Is Meyers pentair sewage ejector pump model SR1830 a quality pump? [ 1 Answers ]

Just installed a sewage ejector pump and I'm somewhat concerned about the manufacture. Not seeing very much information about Meyer. I see Zoeller and Little Giant, so I'm wondering if I got a quality systems. Considering all that was required to get the system in I don't want to revisit this for...

Submersable Pump - 220 volt - Capacitor Overheating - Pump Shutting Off [ 16 Answers ]

My 220 volt submersable well pump stopped working. We took the capacitor in to be checked one day and it was fine. The next day we took the relay in and it checked out. The following day I pressed on one of the wires that goes to capacitor and the well came on. The wire was old so I knew it...

Can same sprinkler pump serve as wet riser pump? [ 2 Answers ]

In a high riser building of about 100m height, a dry riser system is not visible as the firemen's vehicle can't pump water up to 100m. As such, av decided to have it as Wet riser. At same time I don't want introduce a separate pump to avoid over bloating of project cost. My sprinkler system must...

Pool pump and booster pump timer diagrams [ 2 Answers ]

I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts

Pressure Calulations [ 1 Answers ]

I would like to know the formulae for calculations of Pressure before & after the Ventury.:)

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.