Ask Experts Questions for FREE Help !
Ask
    ceasar2008's Avatar
    ceasar2008 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 10, 2008, 11:06 AM
    Pool pump and booster pump timer diagrams
    I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Jun 10, 2008, 01:50 PM
    You will not find a diagram for what you are specifically doing.
    The timers should have come with some generic diagrams, but the folks who typically install these systems don't need diagrams. Systems like this are field built/designed.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jun 10, 2008, 02:49 PM
    Basically from 240 Volt breakers to 240 volt timers Line In, Load is your 2 pumps, Set your On/Off Times. Intermatic make a nice Timer that has Battery Backup to keep timer in sync.
    Correct Grounding, Conductors, and Protection must be observed as Electricity is Dangerous if not done correctly.
    This is Intermatic's page on their timers, Select yours and others, you can download or view the Manual.
    Intermatic Timers
    I also found this, an e learning, Just register, I have not seen but like to believe it could helpful:
    Vuepoint Learning System

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pool pump timer [ 1 Answers ]

I had to replace my intermatic timer and had a freeze protector a polaris pump and a pool pump attached to it. My handy man (not an Electrician) hooked up these things to to my intermatic timer and the only thing that works now is the polaris pump (my hayward superpump pool pump is two weeks...

Pool Timer & pump electrical connection [ 5 Answers ]

If one hooks up a pool pump to an intermatic timer incorrectly, can it blow the pump? I didn't hear anything. Is there a way to tell if the pump is bl;wn or just hooked up wrong? Thanks.

Hooking -up a pool pump from a new timer when wires are not right [ 1 Answers ]

I honestly thought this was going to be a slam dunk and now I'm ridiculed amongst my peers. The wires coming from a pipe that is cemented in the ground are not your normal black white ground. There are 2 black and a green. Coming from the pump there are 2 red and 1 gray . The timer has indicated...

How to select an Intermatic Pool Pump Timer? [ 1 Answers ]

I haven't been able to source a distributor or retailer of Intermatic Pool Timer products in Ontario, Canada. I am looking to purchase one over the internet and have it shipped to me and installed by a local qualified electrician, but I don't know which model to purchase. Intermatic has 4...

Timer For Aboveground Pool Pump [ 5 Answers ]

Hi! I am a pool novice. I have a frameset aboveground pool with a cheesy pump - 1/16 HP, 120V. It's plugged into a heavy duty garage outlet, but it's not clear if it's a GFCI. What kind of pump timer can I use that is safe and inexpensive, possibly GFCI? Thanks!


View more questions Search