Ask Experts Questions for FREE Help !
Ask
    salzperson's Avatar
    salzperson Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 18, 2010, 10:54 PM
    Match motor to capacitor
    I have a South Bend lathe made in 1941 with a GE motor and I need to replace the start capacitor. The capacitor has no information written on it. The motor is
    Model #5KC73AB244 1ph 3/4 hp 60cy 10.8a 110V 1725 rpm and is reversible. Is there any way to find out the rating needed for the capacitor?

Check out some similar questions!

Capacitor or motor [ 9 Answers ]

How do I know whether my capacitor or blower motor is at fault. My blower motor is weak and won't blow the a/c to the 2nd floor. This is a new problem for a 20 year old unit. Thanks Al

Capacitor for new motor [ 2 Answers ]

I just had to buy a new condenser motor for my unit. The NEW motor says that it needs a - 3 MFD +- 5%, 370 VAC Run Capacitor. The OLD motor was setup with a 45/5 MFD +-6%, 370 VAC Dual Capacitor which had a wire from the compressor and the fan wires. Do I just need to run a jumper to the 3 MFD...

Wiring new motor, capacitor [ 1 Answers ]

Someone please help! 99 degrees outside. Bought new a.c. fan motor and capacitor. New motor has 2 brown wires, 1 black, 1 white and 1 green ground. Both brown attached to new capacitor. Where do black and white wires go? Old contacter has one red wire and one open outlet. Where does the red go?...

Motor or Capacitor? [ 2 Answers ]

How can you rule out a bad capacitor? Is the only way by ohms?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.