Ask Experts Questions for FREE Help !
Ask
    JKT's Avatar
    JKT Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2010, 01:03 AM
    I can't get my State "Censible" 510E restarted after draining it and installing seismic braces. What should I do besides opening up the water supply and turning on the power supply? It's about 30 yearold.


    I told you my water heater problem shown above. I want you to answer my problem.
    Why do do you want me to "answer this question" ?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 17, 2010, 07:55 AM

    Hey! No one's answered as yet. Why so huffy?
    You installed earthquake braces? Where do you live? When you drained your heater was the power left on? Do you have a volt meter so you can trace the power? Start at the breaker box and check to see in you have power to the thermostats.
    Now push the red button on the upper thermostat. Still no luck? Then check the elements. Along the way one of the above should check bad. A 30 year old heater is way past its prime. Average life is about 8 years. Good luck, Tom
    segobiano's Avatar
    segobiano Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jul 9, 2010, 02:48 PM
    We will light the heater it will go out aftyer a day or longer
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting Rheems hot water heater model 21V40-38 [ 1 Answers ]

This model has an old fashioned pilot light thermocouple system. The pilot light is lit and appears to be OK. However the water is always luke warm rather than hot so the mainburner is not lighting. Is it the thermocouple or the main gas control system?

State select gas water heater troubleshooting [ 2 Answers ]

I have a State Select gas water heater Model PR 650 NRRTL, 50 gallons unit. The thermocoupler where it suppose to start the unit for heating does not work. The pilot light works but the unit will never start. Do you have any suggestion? Thanks.

Rheem water heater troubleshooting [ 1 Answers ]

New reem water heater worked OK for a few days and now stopped working like would not lite up and heat the water, it happen before and I just unplug the unit and repluged it to reset it and would work. This time it does not want to lite up

State select water heater troubleshooting [ 0 Answers ]

I have state select water heater and it went on vacation mode how to bring it back in regular mode?

State select water heater troubleshooting [ 1 Answers ]

We have a State Select instant water heater that is about 3 years old. It serves a single small sink in a room that is rarely used. Tonight it started to leak. I unplugged it, shut off the water at the isolation valve and opened the drain valve. Less than 1/2-cup of milky-looking water came...

View more questions Search