 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
State select gas water heater troubleshooting
I have a State Select gas water heater Model PR 650 NRRTL, 50 gallons unit. The thermocoupler where it suppose to start the unit for heating does not work. The pilot light works but the unit will never start. Do you have any suggestion? Thanks.
|
||||
|
|
|
||||
|
The thermocoupler is bad or could be the gas valve on front of heater, That should take of your problem try the thermocoupler first cheaper then valve.
|
||||
|
|
|
||||
|
Does anyone know which configuration the valves haft to be in, in order to switch from heat to air conditioning? Any advice or help is greatly appreciated.
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
Power direct vent water heater blower will not shut off. Plenty of hot water. Gas water heater. 75 gallons. State select model pr6 75n rvt. The blower is integral to the unit. I could not find the exact model number on the web site and did not find the problem under the troubbl shooting guide....
We have a state select power vent water heater. Last October it stopped working and the plumber replaced the ignitor as the wires had shorted out. Then it happened again in the beginning of January 2008 and he again replaced the ignitor. Well, our water heater stopped working again today and the...
My state select electric water heater,just stop working and I don't know how to bringing back to work,any ideas.
How do I adjust the water temp?
View more questions Search
|
