Ask Experts Questions for FREE Help !
Ask
    bd3261t's Avatar
    bd3261t Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2009, 01:09 AM
    50a50-241 controller
    Flashes five times but high limit is good
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Nov 1, 2009, 05:22 AM

    There may be other switches present in the limit circuit. The electrical diagram (if present & legible) will indicate any other devices. They may be in series or in a circuit parallel to the main limit switch. What brand/model is the unit you are working on?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Earthnet Controller & Network Controller - missing drivers [ 1 Answers ]

I can't get on the internet because my network controller and my ethernet controller have no drivers, therefore, no connection is made. I cannot update the drivers because the software can't be found in my computer and I can't go onto the internet to retrieve it with my laptop. Whenever I...

White Rodgers 50A50 - 241 [ 1 Answers ]

My heater isn't blowing warm air. It doesn't appear to be igniting. What is the normal voltage output of the igniter wire?

50A50-110 Control Board [ 2 Answers ]

I have a 1995 ComfortMaker, forced air, NG, 80% efficient, furnace with a 50A50-110 control board. The original board was replaced in year 3 under warranty. I am now having regular problems with the furnace going out. The trouble light on the control board blinks from one to six at varying times...

Controller 50a50-241 [ 2 Answers ]

My heat system which made by white-rogers model 50A50-241 is has lockout problem. I am getting cool air 99.99%. It works then go next time lockout mode any help please? Thanks:confused:

View more questions Search