 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xr80 system lockout
When you turn on the system, the led system light flashes one time and goes off. When I read the code on the front; I assume it means one which is one blink. It refers to system lockout. I have no red button, how do I reset furnace.
|
||||
Check out some similar questions!
My xr80 furnace, when the fan is in the auto position, will not stay lit. it flames up for ten to fifty seconds but will not stay lit. when I turn the fan to the on position, it flames up and stays lit. I cleaned the furnace and filter. What could it be? What else can I do?
My Trane XR80 furnace is only blowing cold air. The diagnostic light is bllinking 6 times which, I think, means the 115 volt polarity is reversed. Is this something I can fix or do I need a repairman?
I have a Trane forced air furnace which recently has had periods when it blows unheated air. When I looked at the furnace during these periods it shows 2 flashes, which according to the instruction manual is an error code which means: System lockout, retries or recycles exceeded. I don't...
Woke up to a smell of electric smoke... furnace (gas) on, but not blowing warmth into the house. I did a few things and this is what happened: 1. Heater on, fan on auto, no flow of air, the igniter wouldn't work either, smell of elictrical burn-out 2. Heater on, fan on, no flow of air, igniter...
My tenant is trying to turn the furnace on for the first time this fall. She can get the blower to blow out cold air, but not hot. I told her to turn the (digital) thermostat to "off" and to leave it off for a bit. Then to turn it to "heat". She says when she does that it just blows out cold...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
