Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Trane XR80 Furnace will not stay lit
 [ 10 Answers ]
 Hi all, I have a 6 year old Trane XR80 furnace that will not stay lit. It will light for about 2-3 minutes than will go out. It will stay out until the system is turned off for a significant amount of time. The filters are new and I have cleaned the burner parts. What other things can I check?... 
Trane XR80 Furnace Open High Limit Device
 [ 16 Answers ]
 I have a Trane XR80 furnace that has an LED flashing 4 times--Open High Limit Device. The filters are new and clean, I replaced the high limit switch, cleaned the flame sensor. Are there other switches I could check? Any other ideas? Thanks for any help or ideas. Brian 
Trouble shooting a Trane xr80 Furnace
 [ 13 Answers ]
 My furnace is blinking 3 times and won't turn on. I have a Trane XR80 and no manual or trouble shooting codes. Could somebody please tell me what it means when it blinks red 3 times and won't turn on? Thanks... very cold:confused:!! 
Trane xr80 furnace installed with old coil from over 10 years ago.
 [ 3 Answers ]
 Should I replce the coil with a trane compatible with the current unit instaled a year ago? What would be the difference. Finally, my house is 2000 sq ft from 1983 and the ducts are I don't think placed in right positions. 
The Trane XR80 smells.
 [ 3 Answers ]
 
Woke up to a smell of electric smoke... furnace (gas) on, but not blowing warmth into the house. I did a few things and this is what happened: 1. Heater on, fan on auto, no flow of air, the igniter wouldn't work either, smell of elictrical burn-out 2. Heater on, fan on, no flow of air, igniter... View more questions Search 
  |