Ask Experts Questions for FREE Help !
Ask
    qbert99's Avatar
    qbert99 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2010, 12:07 PM
    Weil- mclain b-68 motor runs continuously... is this normal
    I just replaced the ignitor on this unit and after the flame is ignited the blower motor runs 24-7. If I shut off the ac to it and back on the motor does NOT come on. When it lights up again the motor stays on.. Steam heat 1 pipe
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 3, 2010, 12:11 PM
    Weil-McClain?? Is this a boiler you have? If so the small powered fan motor for the exhaust should only run when there is a call for the boiler to fire to heat. Check other controls to be sure all else OK.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weil-mclain ultra 155 [ 3 Answers ]

I have power to my boiler because the fan is running, but no power to the electronics. So no firing, no sensing and no heat. Are there fuses in there that could be blown? Unit is 2 years old.

Transformer for Weil Mclain e.g. Boiler [ 7 Answers ]

I'm looking for a transformer with a circuit breaker to replace a White-Rodgers 90-112 transformer/relay. I can't find the combination with a breaker so I figured I'll buy the transformer and then pop it in in the 4" X 4" backplate since the relay is not used anyway. Will the Honeywell AT150F1022...

Weil Mclain Lockouts [ 1 Answers ]

Purchased a Weil-McLain Ultra 230 Hot Water Boiler Natural Gas about a yr ago. From basically day 1 have had lockouts. In the 30-50 range over a course of weeks. Now down to 18. Reason: Return temp exceeded the supply temp. Have had numerous visits from Weil Mclain people and people that...

Weil-McLain Boiler settings? Look right? [ 3 Answers ]

Weil-McLain Gold Oil Model: WTGO-4 Series: 3 Net Output... Water 128 MBH Pressure set at 22 Water Temp at 162 Feet H20 at 40 Water Heater is Amtrol Boilermate WH7ZDW

Heating weil mclain furnace [ 1 Answers ]

My furnace burner don't want to start by imself If I push the reset buton the burner start for 45 second That it I need to keep pushing the button for burner to start What is my propleme, why do the burner don't want to start By imself?

View more questions Search