Ask Experts Questions for FREE Help !
Ask
    brian in sd's Avatar
    brian in sd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2010, 08:16 AM
    Lennox pulse furnace cycle fan runs
    My lennox pulse is not keeping my house warm enough, sounds like the fan runs constantly and can hear the furnace kick on for a few seconds at a time. What's the problem. BTW its -30* F this morning
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 2, 2010, 08:23 AM
    A Lennox Pulse furnace has to be serviced by a trained Lennox Pulse professional. There is no way around this since if the Pulse gets out of adjustment very nasty things can happen. I have serviced the Pulse furnace years ago and this is why I recommed professional on site assistance. I do not want to see you or anyone in your family get hurt.

    See recalls and other info

    http://www.inspectapedia.com/heat/lennox1.htm

    http://www.bobvila.com/wwwboard/messages/243450.html

    http://forum.doityourself.com/gas-oi...placement.html

    There are hundreds of posts like these.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Pulse Gas Furnace? [ 5 Answers ]

I am having a diagnostic "nightmare"... only due to lack of knowledge of the Lennox Pulse. This is a roughly '90 model. 80,000 BTU... The problem: Furnace lights for about 10 sec- 2 minutes... shuts down... It resembles a primary air problem, sounds of the fire sucking air. A previous tech just...

Furnace runs through cycle but at end the fan will not shut off [ 0 Answers ]

Furnace runs through cycle but at the end blower does not shut off and continues to blow cold air until I manually go to the furnace and unplug the plug at the outlet.

Lennox Furnace fan only runs on slow speed in heating mode [ 4 Answers ]

I hope someone out there can help me under the control logic and components on my 1994 Lennox G20RE gas furnace. My fan runs at normal speed when it runs alone. When the furnace is in the "heat" mode, the fan only runs at minimum speed. It then overheats and begins to smell like it's burning up....

Lennox Pulse Gas Furnace [ 1 Answers ]

Could you Please guide me to a source to obtain the Schematic Diagram of Lennox G14 or G21 Pulse Gas Furnace? I could not find the company web site!

Lennox furnace fan runs on forever [ 1 Answers ]

I have a 10 year old Lennox conservator II forced hot air gas furnace, the furnace itself runs good and produces heat , the problem I have is that the furnace cycle never ends it turns on produces heat then the firing stops the fan continues to run it cools down then before the fan cycle stops...

View more questions Search