Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Heating & Air Conditioning, Fan Runs Forever.
[ 12 Answers ]
Fan not responding to temperature, runs non-stop. Furnace power on, fan runs. Pilot works. Thermostat calls for heat, burner fire successful. Fan already running. Thermostat setting met, burner turns off. Fan continues to run through succeeding cycles. High limit switch okay. New fan...
Fan runs forever when in heat mode but not in ac mode
[ 2 Answers ]
Great web site and concept!! I have a York forced air gas furnace that has a Honeywell Fan Limit switch. The unit works great in the summer. The ac and the fan shut off correctly. However, in the winter the heat will reach its temp setting and turn off but the blower continues forever. I have...
Lennox G12 furnace runs constantly
[ 3 Answers ]
Furnace runs constantly and gets quite HOT, even if thermostat doesn't call for heat. Changed thermostat, didn't help. Removed new thermostat and checked to see if thermostat wiring had spark, it didn't. What now? I recently vacuumed unit. Does that matter? It ran fine for a few weeks following...
Forever to start, then runs fine?
[ 4 Answers ]
I've got an '89 YJ carbed 6. Takes forever to start, just won't turn over. I mean like 10 minutes of cranking and pumping. When it finally does, it's almost like it's flooded. Once it starts, it runs absolutely fine, no stalling, missing, etc. Any ideas? View more questions Search
|