 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Where can I buy limit swich model 271n for york furnace diamon 80
Limit switch for york diamond 80 model furnace, switch is made ny Norton Model 271N,
Part number 025-32625-000, there's 0402 . This parts have 2 wires with 2 black flat rod( made of flint rock) sticking down , they shattered while I'm trying to clean them. Since the furnace keep on blowing cold air and there 4 flash on the RED LED, error code on theback of panel says spill limit switch open. Thanks Conrad |
||||
Check out some similar questions!
My furnace gives me this code by flashing the led 4 times which reads on the diagram in it that the limit circuit is open- I cleaned then little buttons that I think are the sensors. The blower won't shut of and just blows cold air- the burners are not igniting when I turn the thermostat way up. ...
Four blinks says reset hi-limit switch. Could not reset stuck button so I replaced it. Still blinks four times. What can I try next?
I have a RHEEM Gas Furnace Model 3214-100FB. My problem is that when the heat shuts off the fan keeps moving until all the hot air is removed from the vents. The fan then continues to blow until the house becomes cool again, which then causes the heat to have to come back on. What are the proper...
Where can I find a primary limit switch for my furnace - Guardian HW SV9500 ? I've checked all local stores but they don't have it. Thanks
I replaced my gas valve because it was cutting off after a few minutes of operation. This worked great for about a month or so but now it is doing the same thing again. Is there another issue or is the gas new gas valve bad too? Any help will be appreciated. Thanks Reedlr
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
