Ask Experts Questions for FREE Help !
Ask
    dillonm's Avatar
    dillonm Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 22, 2009, 08:52 AM
    E-350 6.0powerstroke egr valve replacement instructions
    I have a 2004 E350 superduty w-6.0 powerstroke I had the egr valve replaced 1yr ago. Im experiencing the same problems. Veh will idle very rough and has stalled while driving. Should I replace again or clean? I would like to perform this task myself. Egr is not easily accessible in a E350. Im looking for instruction to perform this. Also suggestions on how to keep this from happening again.
    dillonm's Avatar
    dillonm Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 22, 2009, 08:54 AM

    E-350 6.0powerstroke egr valve replacement instructions

    --------------------------------------------------------------------------------

    I have a 2004 E350 superduty w-6.0 powerstroke I had the egr valve replaced 1yr ago. Im experiencing the same problems. Veh will idle very rough and has stalled while driving. Should I replace again or clean? I would like to perform this task myself. Egr is not easily accessible in a E350. Im looking for instruction to perform this. Also suggestions on how to keep this from happening again.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Dec 22, 2009, 09:04 AM

    I'd like to ask a few questions:

    Is their any relationship at all with the rough idle?

    For instance, it will occur when I've driven the car and it reached operating temperature and then the car sits for between x and y minutes. When I re-enter my vehicle, the idle speed is rough?

    Are there any solenoids connected to the EGR valve? Is it located in a "Hot" spot.

    The EGR is an easy replacement based on accessability, but it should not be that frequent.

    I think I replaced one on a carburated car once on 238K miles and 18 years.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What acts like an egr valve on my 2000 lexus rx 300 [ 11 Answers ]

My lexus rx 300 is sending a code saying that there is a problem with the egr valve.I called the dealership and they said it doesn't have an egr valve. Could anyone help me with this? When I drive it runs a little rough also when I'm on the highway at 60mph the rpm stays at 4000 really high.

98 honda accord egr valve [ 2 Answers ]

I work for ford but my honda accord has a check engine light on I checked the code and it leads me to a egr valve clogged. Couple technicans told me to take it out and clean it. How do you clean the egr valve and also should you clean the passage that it goes to. Do you just spray the cleaner in it.

1988 Honda Civic lx 1.5l PGM-FI EGR Valve Location [ 1 Answers ]

If anyone familiar with the location of the EGR valve for this particular engine and car I would appreciate any help. Just trying to trouble shoot a rough run problem that all of the sudden started. Thank you

Egr Valve Location [ 1 Answers ]

Please advise (photo) were I can locate the EGR Valve on a 1995 Camaro 3.8 ltr engine. Is it something I can easily swap out? Socket/wrench size needed. What other years of a 3.8 engine EGR Valve would be the same. Thanks Gord C

View more questions Search