 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool Gold Washer water will not pump out
Agitator spins and go through the cycle, but leaves water in the bottom of drum. I removed discharge hose and found not obstruction. I removed the agitator and found not blockage in the bottom of drum. Where do I look next? Thanks, Bill
|
||||
Check out some similar questions!
If you have a Whirlpool gold washer(and some others for that matter)that won't go into spin cycle,there is a very good chance the problem is with the lid switch.On my Whirpool gold washer the lid switch separated slightly and I was able to to use two zip ties to hold it together.This fix may or may...
My Whirlpool Gold (Catalyst) Washer model GSX9885JQO will suddenly not drain. I was in the middle of washing several loads of wash. I went to empty the clothes and put the next load in and it had not drained. I ran various parts of the drain cycle over. It will add new water, but wherever it is...
My washer will fill and agitate but when it should drain it just recycles the water back into the tub. Originally we had an error code "LD" and took the whole thing apart to find a sock in the pump. Now that I have put it back together, it won't drain just recycles.
This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel?
I have a Whirlpool washer GSX9885JQ0 that burnt the motor and cap too. Is this a common problem. Is there a way to check the control board to see if that was the problem or is it one of those things that I need to replace the motor and if that burns up then next time I should replace the board...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
