Ask Experts Questions for FREE Help !
Ask
    mango65's Avatar
    mango65 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 4, 2009, 09:05 PM
    Gas Furnace not working with installation of Heat Pump
    My AC unit went bad this summer. The HVAC guy talked me into a Heat Pump (Goodman). The ac worked fine this summer. I began to use the heat pump for heat this fall and it worked great Now the Temp is 35 degrees and I set the thermostat to emergency heat. The gas furnace will blow but no heat comes out. The HVAC guy now says I have a bad circuit board or ignitor. The gas furnace worked fine until heat pump was installed. I think I am getting screwed. The gas furnace is a high effinciency HEIL. Any ideas before I pay this guy more money.
    450donn's Avatar
    450donn Posts: 1,821, Reputation: 239
    Ultra Member
     
    #2

    Dec 4, 2009, 09:55 PM

    Not really sure how the installer wired things, but generally a HP works and when the outside temps are too low it automatically switches to the auxiliary fuel. I would not consider paying again for work performed. Unless of course it is your fault. Call the installer and explain the situation and ask his advise.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Dec 4, 2009, 10:15 PM

    Out of curiousity, are you set up as a dual fuel system?

    Was the gas "emergency heat" every checked out?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #4

    Dec 5, 2009, 05:40 AM

    It is very possible that something in the thermostat control circuit was wired incorrectly at the time of replacement. Heed your suspicions...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Furnace.Heat won't turn on in AUTO! It's gettin' cold in Utah. [ 0 Answers ]

Hello, My house was built in '05 and I have an Ultra V Tech 80 Natural Gas Furnace. I have a digital thermostat controlling it which has always been there. My problem is that I can't get the heat to kick on when it's in Auto. I can use the thermostat to just turn the fan on so I guess the fan...

G40UHX Lenox gas furnace not working [ 3 Answers ]

My LENOX gas furnace Model: G40UHX series does not work at all. I tried to start the furnace the main Blower kicks in. The Small blower does not run and Fire is not lit in ignite. The Air Condition Cooling unit is working. The Xformer has 27VAC output.

New Honeywell Thermostat for Heat Pump and Gas Furnace - not working [ 5 Answers ]

We recently bought a Honeywell RTH7400 for our home with a Goodman cple30-1 Heat pump and a Janitrol Gas furnace. I hooked it up according to the Honeywell instructions. C to C G to G Y to Y O to O/B R to RC with jumper to R W2 to Aux with jumper to E I set it to 7 on function 170...

Heat Pump Installation [ 6 Answers ]

I have had numerous problems with my Lennox Heat Pump. I have had 3 condensers and one air handler replaced in 16 years. I also let them replace the complete outside unit 4 yrs. Ago. My air handler is in the crawl space and I do not have a condensation pump going to the exterior. I have asked my...


View more questions Search