Ask Experts Questions for FREE Help !
Ask
    nlooney's Avatar
    nlooney Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 23, 2009, 08:14 PM
    Gas Furnace.Heat won't turn on in AUTO! It's gettin' cold in Utah.
    Hello,
    My house was built in '05 and I have an Ultra V Tech 80 Natural Gas Furnace. I have a digital thermostat controlling it which has always been there. My problem is that I can't get the heat to kick on when it's in Auto. I can use the thermostat to just turn the fan on so I guess the fan works. I'm really bad at this stuff. I found another guy that posted in '08 that he had the same problem but there wasn't a reply. I'll post his too. Hopefully someone can help me out. I'd really appreciate it. Thanks! :)

    "Just moved into a rental house on a temporary basis and ran into a problem.
    The house has Ultra V Tech 80 furnace which will not start. There is no heat and the blower will not blow when on auto.
    I opened it up and checked the LED. It is blinking non-stop which does not match any of the codes on the sticker on the door.
    Anyone have any ideas or at least a link to the owners manual?
    I have already tried resetting breakers, changing filters and cleaning the flame sensor."

Check out some similar questions!

I work in Alaska and live in Utah. Do I need to pay Utah state income tax? [ 7 Answers ]

I live in Utah but I work in Alaska. All of my income is made in Alaska. Do I need to file a state return with Utah?

Blower won't run in auto for heat with oil furnace [ 9 Answers ]

I have an oil furnace. A/C works fine. Heat last season worked fine. Started up furnace this year just fine. But blower would not start on auto. The blower will run in heat mode when set to On. I replaced the Limit Switch in the Plenum. No change.

Furnace heat does not turn off [ 1 Answers ]

Turned the thermostat on to get some heat. After the room warmed, turned the thermostat off. Although the thermostat was turned to off, the temperature rose to be over 90 degrees. I decided to check the furnace and turned the gas cock off because I didn't want to produce any more heat. Could...

Furnace won't heat in Auto [ 2 Answers ]

I have read the different posting and replys, but they don't seem to address my problem. Friend has an older Kenmore Power Miser 70 that has an old electronic ign. (no flame senser). The furnace will heat when the fan switch is set to "on" position, and it will cycle the heat. When the fan is...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.