 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
60 amp breaker and 50 amp spa
I am installing a 50amp hot tub. I have a disconnect panel that is 60 amp and states that it is for all hot tubs up to 60 amps. It also has a 15 amp branch circuit. What size breaker do I need to install in the main panel? What size wiring do I need from panel to disconnect and from disconect to hot tub?
|
||||
Check out some similar questions!
I am buying a dry sauna that has a 20-amp plug. The outlet in my home says 15A. The breaker for this outlet says 20. Can I use this dry sauna on this outlet. Do I need to change the outlet. Is breaker adequate if I do this? Dry sauna brochure says: 120 volt / 1531 watt/ 12.75 amp....
I have a b7S model 243431-0123-99 I need to khow what to set the points on. Thanks
I found my mom's submersible pump wired to a two single pole 20amp breakers and there is a double pole 30amp breaker on the bus panel as well. I already know that all 220volt leads need to be on a double pole breaker in case one leg grounds out. So I switch the wires over to the double pole 30amp...
I have wired a generator into my 200amp breaker box. The generator power enters the box via a 50 amp breaker. My local utility representative tells me that the 200 amp main breaker does not have enough clearance to safely isolate my generator from the power grid. He is telling me that there...
Where do I purchase a rod and key to turn on and off an old gas floor heater?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
