Ask Experts Questions for FREE Help !
Ask
    niceangel0724's Avatar
    niceangel0724 Posts: 9, Reputation: 1
    New Member
     
    #1

    Nov 20, 2009, 08:27 PM
    Thermopride gas furnace
    I have a furnace thermopride natural gas with blower, about 12 year old ! The furnace does have a eletronic ign,turn on but the frame don't come on ,the machine keep doing that fill time and don't fire up ! U have idea what the problem?? thank you
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #2

    Nov 20, 2009, 08:52 PM

    Does the vent motor run? Does the ignition spark or glow? If you turn it to fan does the fan run?
    niceangel0724's Avatar
    niceangel0724 Posts: 9, Reputation: 1
    New Member
     
    #3

    Nov 20, 2009, 08:58 PM

    Yes everything works.but it is all eletronic ,I replace a new motor today,but the frame don't want goes on

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier gas furnace code 31 [ 3 Answers ]

Hi. I have a Carrier gas (propane) furnace 58MCA100-11116 series 111. It shows a code 31. The evacuation blower runs for a short time then kicks off. The burners do not ignite. To date I have: replaced the pressure switch, checked in and out lines to the pressure switch for obstruction,...

Goodman gas furnace will not ignite [ 8 Answers ]

I have a goodman gas unit. The igniter will glow red I can here the gas valve click and then I can hear the gas come on but it will not light. If put my finger in front of the burners I can feel the gas and I can also smell it. Can anyone help me thinks.

G40UHX Lenox gas furnace not working [ 3 Answers ]

My LENOX gas furnace Model: G40UHX series does not work at all. I tried to start the furnace the main Blower kicks in. The Small blower does not run and Fire is not lit in ignite. The Air Condition Cooling unit is working. The Xformer has 27VAC output.

Gas Furnace won't Light [ 1 Answers ]

I am trying to light my gas furnace in my house but it won't light. I light the pilot and when I turn the dial to on the flame goes away and no gas in going through! What am I forgetting or doing wrong?

Thermopride furnace fizzles during cycles [ 10 Answers ]

I have a Thermopride, 2 stage NATURAL GAS fired Condensing Furnace Model # CHX1-75N Almost 5 years old 95% Efficiency Lux products programmable thermostat- Series 602 The issue that we are having is when the furnace has not had enough time to rest in between cycles. It will bring it up to...


View more questions Search