Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I can't get heat to work on my heat pump
[ 13 Answers ]
I have installed a Goodman self contained single staged heat pump but cannot get the heat to come on. I installed a Honeywell circle manual thermostat. If I put it on Cool with the fan on auto, the a/c and fan work great BUT when I put it on Heat with the fan on auto, I get no heat, just fan....
The Heat and A/C do not work.
[ 1 Answers ]
My Honeywell thermostat battery was low. In removing the thermostat, I did not realize that there were two screws holding it to the baseplate. Therefore, I yanked it out of the wall and noticed sparks where the wires were connected to the terminals. I finally removed the thermostat and replaced the...
Heater turns on but no flames or heat
[ 4 Answers ]
Hello , I have a nordyne ra 80+ upflow/horizontial furnace. Currently my furnace is on but does not give off any heat, rather I see no flames on my furnace. My LED display states there is a fault condition of "Limit circuit open or External load on W" What does that mean. Can anyone shed some light...
A/C working, switched to heat, now ac and heat don't work
[ 1 Answers ]
Hello, Replaced my thermostat in the summer, everything worked good,switched the new thermostat to heat for the first time, now neither the A/C or heat work? Any Ideas? Andy
AC or Heat does not work when switching to AC or Heat
[ 3 Answers ]
I have a programmable thermostate installed a year ago and it has been working since until a few days ago. Both AC and Heat don't work , I don't hear any kicking. I did a reset on the thermostate did not make any difference. The fan is on Auto. Now I am interested in knowing if it is the... View more questions Search
|