Ask Experts Questions for FREE Help !
Ask
    Kevin Fisher1's Avatar
    Kevin Fisher1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2009, 10:18 AM
    Goodman GMP100-4
    The light is continuously blinking and trying to figure out source of problem or what I need to replace. AAA appliance came over it was coming on for a few seconds and now it's not working at all any suggestions what they might have done.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 9, 2009, 11:34 AM
    If you paid a company to come over and fix your furnace I suggest you call them back since you should get what you paid for.

    On the inside of the blower door panel there will be a legend on the blink codes. Look there for what it says
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman GMP100-3 Furnace won't Stay On. [ 14 Answers ]

Hello, I have a Goodman Furnace (model # GMP100-3). The furnace will not stay running. Here is the sequence of events for two different scenarios that are occurring. Scenario 1 1. Thermostat Calls for Heat 2. Inducer starts 3. Pressure switch closes 4. Heating element glows 5. Burners...

Goodman GMP100-3 [ 1 Answers ]

Hi, Have a Goodman GMP100-3 that's acting strangely. Here's the scenario: - Thermostat calls for heat - Inducer starts - Vacuum switch pulls in - Furnace fires - Furnace comes up to heat and blower starts - Ignition cuts out as blower starts

Goodman GMP100-4 blows hot air [ 3 Answers ]

The indicator light on the control panel blinks four times. The cover panel says that 4 blinks is either limit switch open or auxiliary switch open. We replaced this control board in October 07. Do we need to replace the board again? Is it possible that the board is wired incorrectly? Does...

Goodman GMP100-4 blows cold air [ 4 Answers ]

Hi, I have a GMP100-4 that blows cold. The pilot light is on and the burners burn but only for a few seconds before turning off again. The blower is on all the time so I'm getting little to no heat around the house. I've replaced the filter, I assume there is only one and it is situated...

Wiring inline duct fan to furnace fan goodman gmp100-4 [ 2 Answers ]

How do I wire my inline duct fan to my Goodman model gmp100-4 gas furnace fan so that the inline duct fan comes on and off when the furnace fan does? I understand that I need a relay from the inline duct fan but don't know where to connect the relay to the furnace.

View more questions Search