 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Changing Honeywell thermostat to Goodman
I am trying to wire a Honeywell 7500 series thermostat to a Goodman gph1560m41a. The schematics on the manuals do not match. I get heat when I turn on the cold and no cold or anything when I turn on the heat. This is a 24-volt system (on low voltage), 2-stage hot/cold with optional 3rd stage heating. I need to know the wiring schematics.
|
||||
|
||||
|
EXACT and complete model number off the honeywell thermostat?
Exact and complete brand and model number off the old thermostat? Some wiring for you in the mean time http://www.alpinehomeair.com/related/2-Stage%20Heat%20Pump%20Pack%20-%201%20Stage%20Aux%202.pdf http://www.alpinehomeair.com/related...tage%20Aux.pdf http://www.alpinehomeair.com/related...structions.pdf http://www.alpinehomeair.com/related...structions.pdf BTW it does not show a 3rd stage heat with this unit?? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...
I am trying to change a thermostat from Goodman HPT 18-60 to Honeywell RTH6300B, but having a trouble to understand the wiring. The old thermostat has connected with six wires: yellow, green, white, blue, red, and orange. Y = yellow wire G = green wire W2 = white wire R = red wire O =...
I am trying to change my goodman thermostat (CHT18-60) to a hunter 44155C. The goodman wired up this way: Red - R Green - G White - W Blue - 2 I know the red is the hot from the transformer, green is the fan, white is for the heat and blue is for the cooling. The problem I have is...
OK here's what I got I have a manual goodman thermostat on a heat pump with auxiliary heat. On the goodman thermostat this is how it was waired, C=blue wire, E= garyish wire, W2= white, G=green, R=red, O= orange. now this is how I hooked up the honeywell, this is vision pro 8000...
I am trying to change from a Rudd thermostat and system to a Honeywell RTH 7500 Thermostat. Having problems with the wiring as it does not work properly. The system that I have is a heat pump in the attic with auxiliary heat and an air conditioning system outside. I am not sure if this should be...
View more questions Search
|
