Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
4" pvc to cast iron connection trouble
[ 7 Answers ]
Sorry, I messed that first thread up. My problem, 4" cast bell has been cleaned Of all lead and oukum without breaking the bell. Intended on replacing with sch 40 Pvc and fernco donut gasket. I have read the answers, such as greasing only spigot And inside of gasket. I cannot get this joint to...
Pipe type from cast iron to ABS or SDR?
[ 4 Answers ]
I got very helpful information from speedball regarding the test plug to be placed at the bottom of the pipe being laid from the house to the sewer connection in our conversion from septic to sewer. I have 2 more questions- 1. We have a cast iron 4" pipe leaving from the house and need to connect...
Shower drain connection with cast iron pipe
[ 7 Answers ]
We have a cast iron shower drain pipe in a concrete floor. It is a shower on a slab. We are building a shower pan with tiles or pebbles as a finish. We have purchased drain but it is not working - it is for premade shower enclosures. We need some kind of adapter to connect cast iron pipe with PVC...
Underground Cast iron to pvc
[ 1 Answers ]
I am adding a on to a bathroom in my basement. I want to put a sink a tub in. The main issue is that the sewage line under the concrete floor is cast iron. Can I connect pvc to castiron with a boot and then cover back up with dirt? Are there an issues with do it that way? Is there a better way?
Cast iron drain connection
[ 4 Answers ]
Hi, we have a house built in the ealy 50's. We've torn out a small tiled shower and want to replace with a new one that doesn't leak. We have a 2" cast iron drain pipe sticking 1 1/2 inches above the house slab. What is the best way to connect a new two piece drain before we build or install new... View more questions Search
|