Ask Experts Questions for FREE Help !
Ask
    maclance's Avatar
    maclance Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2009, 07:24 PM
    What size wire do I use to run to pool pump
    Hi,
    What size and type of wire do I need to run from the electrical panel to the pump for an above ground pool that is 150 away?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Aug 6, 2009, 07:18 PM

    What is your voltage and amps requirement? Most above ground pools all use 120 but I need to be sure. What gauge wire is on the pump motor right now?
    maclance's Avatar
    maclance Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 6, 2009, 08:46 PM
    The pump is a 0-1086-020 pool power pak 2= 115 vac-60 hz 3450 rpm 1 hp 10.0 amp motor. It is double insulated. It will be pluged into a Goldline controls aqua trol clorine generator control box that is 110-130vac 60hz 15 amp unit. It is 145 feet from the panel to a location 10 feet from the pool, The control box has a 3 ft
    cord with non locking end ,(twist type). The pump is used and unfortunately we discovered tonight it was wired with a 18 gauge 25 foot extension cord. The terminal plate is missing as well so I can't answer the second part of your question knowing the proper cord will need to be installed along with the terminal cover.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump wire size [ 3 Answers ]

I am installing a 5 ton heat pump. The wire run is 30 feet. The unit specifications are: Voltage 208-230, minimum circuit ampacity 33.0, max breaker 45.0. What size supply wire will I need to use? Thanks

Size of wire for a pump? [ 9 Answers ]

I have a submersible pump 1/2 horsepower 425 feet from the breaker box. It is going down hill. What size wire should I run from the box to the pump. What is the best place to purchase the wire (mesquite, Tx), THanks WIll

Above ground pool: Wire size and burial method? [ 3 Answers ]

Hi, I'm planning to run a pair of circuits to the backyard for an above ground pool. The pool pump + salt cell requires a 20 amp @ 120 volts circuit, and I calculated that #8 AWG conductors are required to keep the voltage drop below 3%; the run is about 190 feet. The second circuit will only be...

View more questions Search