 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2 switched Fan/Light bathroom wiring job
I am trying to hook up a double switch (2 separate switches in the same box) (ceiling fan-light) in my bathroom
Each wiring group from the wall has 2 blacks 2 whites and 2 grounds I have the light working by connecting the 2 blacks (1 per side of switch 2 screws) and wire nutting the two whites together and the same for the fan The light comes on but not the fan Should I connect one of the 2 blacks that work for the light to the fan switch since I know they work? |
||||
|
||||
 Originally Posted by vikim2004
A wire is a wire, a cable is two or more wires in an outer covering. By group do you mean cable and if so, do you mean that you have two cables with a black and white wire in each cable? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I need a wiring diagram to control a switched receptacle and a motion light. The power to the motion light must be constant. The power to the receptacle switched. Any help would be appreciated.
I have had to replace the plasterboard on my bathroom ceiling due to a leak, but the details for where the wires connected, were written down but seem to be wrong. I need to connect the wires from the light pull cord to the light fitting to the fan.
I am upgrading my fan/light combo to a light/fan/heater combo in our bathroom. I have installed the unit in the ceiling and am preparing to wire it in. I would like to use a combination 3 switch allowing for the different components to be controlled separately. This, I hope will also allow me to...
I am trying to have my bathroom light/fan operate separtaly, with one switch operating the light and the other operating the fan. The power coming to the switch is 3 wire (black, white, and ground). The wire coming from the light/fan:confused: is 4 wire (black, white, red, and ground). I have 2...
I am about to replace the light fitting in the bathroom, but the extractor fan is connected to it, there is a number of wires which are all connected, with only 2 brown wires coming down, but I have 3 connections on my new light fitting -earth, live, neutral, how do I connect it properly?...
View more questions Search
|
