Ask Experts Questions for FREE Help !
Ask
    faustfam's Avatar
    faustfam Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2009, 10:48 AM
    Maytag Performa Dryer Timer
    The timer on my Maytag Performa Dryer does not move when set. Do you know what the problem may be?
    gmll1's Avatar
    gmll1 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Nov 30, 2011, 06:30 PM
    My maytag timer will not move. But I have heat
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Dec 1, 2011, 01:32 AM
    You need to either replace the timer motor or the whole timer. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Performa Dryer, Hot But Not Drying [ 5 Answers ]

We have a 10 year old Maytag Performa washer & dryer set. A few weeks ago, we noticed that upon starting the dryer, it made a horrible racket and then went back to normal within a few seconds. It gets hot, but the clothes are not really dry, even after a 70 minute cycle. Is this the fan,...

Maytag Performa Dryer [ 1 Answers ]

Maytag Performa dryer that shuts off after running for 3 minutes with wet clothes in the drum. Will run without any problem if drum is empty. Can feel heat.

Squealing Maytag Performa Dryer [ 1 Answers ]

I am having a problem with my Maytag Performa model # pye1000ayw electric dryer squealing when it is in operation. It has actually been able to start up again but it eventually (within a few minutes) starts the noise again and eventually becomes so bad that it stops in its tracks. Please let me...

Maytag Performa Dryer won't turn on [ 1 Answers ]

Our Maytag dryer - Model # pyet344ayw performa - which is 3 yrs old, quit running/turning on. I've checked the power breaker and have read online to look for burnt wires, etc. A lot of forums say to replace the thermal fuse if you get anything other than a ' 0 ' reading on your OHM meter. ...

View more questions Search