Ask Experts Questions for FREE Help !
Ask
    Jim Bender's Avatar
    Jim Bender Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2009, 02:36 PM
    Kenmore washing machine Model #110.22652100 not spinning
    Kenmore washing machine Model #110.22652100 not spinning.

    Everything appears to be working except for the spin cycle. Water drains and the motor runs but no spin (it agitates fine). Could it be a bad clutch or brake or even gearcase? How would I test for each? The clutch spins when I spin the gearcase coupler by hand ( I can spin the clutch band by hand with some effort). The basket will not spin at all unless I manually release the brake by hand and only then can I spin the tub by hand (the driver brake cam seems a little wobbly). Oh yeah, there was a black soot in the clutch and on top of the gearcase cover when I disassembled the machine – could this be from the brake seizing or the clutch? I was doing a few big loads (blankets) prior to this problem.

    Any guidance would be much appreciated.
    Jim Bender's Avatar
    Jim Bender Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Apr 30, 2009, 08:16 PM
    68 views and no help? :(
    Jim Bender's Avatar
    Jim Bender Posts: 4, Reputation: 1
    New Member
    		  
    #3

    May 5, 2009, 06:49 PM

    Is there anyone out there with any knowledge to share?
    Jim Bender's Avatar
    Jim Bender Posts: 4, Reputation: 1
    New Member
    		  
    #4

    May 14, 2009, 12:47 PM
    Well, I am happy to report that wihtout the help of anyone on here I was able to fix my washer. I did receive some help from other websites. I suggest you try those if you are looking for assistance.
    jwbarnes's Avatar
    jwbarnes Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Sep 9, 2009, 07:48 AM

    How did u fix the problem
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washing Machine model # 417.44052400 [ 2 Answers ]

Hi, I have a Kenmore Washing Machine model # 417.44052400 that won't spin. I have done a diagonstic test on the machine and it comes up the error code 43. My book says that I need to replace the control board. I have now purchased that board and installed it, but my machine is still doing the...

Kenmore 70 series washing machine not spinning [ 1 Answers ]

Our Kenmore 70 series heavy duty super capacity plus washing machine will not spin on it's own for the spin cycle without us first lifting the lid. Once the lid is lifted it will then "catch" and begin to spin. This has to be done for every spin cycle during a wash load. Would someone happen to...

Kenmore washing machine no longer rinsing, draining or spinning w/out manipulating. [ 2 Answers ]

I have a Kenmore washing machine model 110.8244110. I had a heavy load of rugs that left pieces of rug in washer and was off balance. There was a slight smell of something burning but that is gone. Now it doesn't drain completely. It is about 1/3 filled w/ soapy water. Since then I have to...

Kenmore Washing Machine Model 110.26722690 [ 3 Answers ]

I have an ~1996 Kenmore washing machine. The motor coupling needs to be replaced, but prior to replacing it I noticed that the bottom agitator will not move in either direction. What do I need to do to trouble shoot this problem? Thanks for your help!

View more questions Search