Ask Experts Questions for FREE Help !
Ask
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #1

    Dec 20, 2008, 03:17 PM
    Seaming a refrigerator gasket
    Got a piece of continuous length refrigerator gasket. This is one of those refrigerators with an internal door for the freezer at the top. It also latches. Antique. The gasket does not include a magnet.

    1. Where is the best place to seam? I'm thinking lower left hand side near the bottom, maybe 12" up.

    2. How to seam? I'm thinking a diagonal.

    Make sense?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 20, 2008, 03:46 PM
    Cold air falls to the bottom. Try near the top corner or where the original was welded or put together. I still have a Crosley Shelva-Door.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Dec 20, 2008, 10:04 PM

    They seemed it at the bottom middle with a straight cut.

    The corners are cut. Solid around the outer edge, but not thermo-welded.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Dec 21, 2008, 12:47 AM
    Somewhere in my tool selection I still have a gasket notcher. LOL

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Head gasket [ 1 Answers ]

I have a honda civic 1989 120,000 miles 3dr. 1.5 std I blew the head gasket last summer and its been sitting all winter. The head gasket was replaced 30.000 miles ago but someone messed up. I just now got the head resurfaced and oem bolts and gasket per the tsb $200! 2 questions:...

Antique GE Refrigerator gasket source [ 1 Answers ]

Mod: AF-92-BA16, Type: LB-87-CB Has a locking pull handle.

Gasket Problems... [ 2 Answers ]

I am changing out a shower and now I need to know which gasket goes first, (in the drain area).. the rubber or the friction? Appreciate the help I will get... George

Adhesive with gasket or not [ 2 Answers ]

I am installing a PVC shower stall drain in a fiberglass shower unit. The drain unit has a rubber gasket and a friction gasket. Should I install the drain with or without a (latex adhesive) caulk applied to the gaskets? A picture of the drain unit is attached. (I hope)


View more questions Search