|
|
|
|
New Member
|
|
Dec 16, 2008, 04:05 PM
|
|
York 90+ won't fire
Have a york 90+ upflow 100,000btu natural gas unit, won't fire unless I pull the tube from the combustion motor leading to the pressure sensor and put a vacume on it then it will fire and cycle, any suggestions ?
|
|
|
Ultra Member
|
|
Dec 16, 2008, 07:04 PM
|
|
Straighten a paper clip and poke it through the nipple you pulled the hose off. Check for blockage in flue pipe.
|
|
|
Senior Member
|
|
Dec 16, 2008, 07:21 PM
|
|
Do not run the system by bypassing the inducer motor.
|
|
|
Ultra Member
|
|
Dec 16, 2008, 07:25 PM
|
|
Don't listen to MarkwithaK. He's a variable-speed motor basher.:D
|
|
|
Senior Member
|
|
Dec 16, 2008, 07:28 PM
|
|
True. But I fully support people NOT killing themselves.
|
|
|
Ultra Member
|
|
Dec 16, 2008, 08:11 PM
|
|
Originally Posted by MarkwithaK
True. But I fully support people NOT killing themselves.
You're no fun anymore... :p
|
|
|
New Member
|
|
Dec 16, 2008, 08:22 PM
|
|
Originally Posted by KC13
Straighten a paper clip and poke it through the nipple you pulled the hose off. Check for blockage in flue pipe.
When I pulled the hose off before I blew into it to do just that, numerous times and I thought it was clear it never dawned on me to put something down into it
Anyway you saved my wife and kids from a cold night and for that I owe you a debt of gratitude I appreciate your advise and I will pay it forward. Maybe someday I can do the same for you
Merry christmas
Tony Perez
|
|
|
Ultra Member
|
|
Dec 16, 2008, 08:25 PM
|
|
Your comfort and well-being are my rewards... for I am VARIABLE-SPEED MAN! Ha-ha ha-ha ha ha!
|
|
|
Ultra Member
|
|
Dec 16, 2008, 08:31 PM
|
|
Originally Posted by elcaliente
when i pulled the hose off before i blew into it to do just that, numerous times and i thought it was clear it never dawned on me to put something down into it
anyway you saved my wife and kids from a cold night and for that i owe you a debt of gratitude i appreciate your advise and i will pay it foward. maybe someday i can do the same for you
merry christmas
Tony Perez
What's your specialty?
|
|
|
Heating & Air Conditioning Expert
|
|
Dec 16, 2008, 09:24 PM
|
|
Originally Posted by KC13
Your comfort and well-being are my rewards...for I am VARIABLE-SPEED MAN!! Ha-ha ha-ha ha ha!
Dang It you gave away the paper clip trick.
|
|
|
Senior Member
|
|
Dec 16, 2008, 09:59 PM
|
|
Damn man. How are we supposed to earn a living if you keep giving out our 'trade secrets'?
|
|
|
Ultra Member
|
|
Dec 16, 2008, 10:03 PM
|
|
With everyone going green, less paper usage means someone has to come up with a use for all those damn clips!
|
|
|
Senior Member
|
|
Dec 16, 2008, 10:05 PM
|
|
Um hello... paper clip necklaces.
|
|
|
Ultra Member
|
|
Dec 16, 2008, 10:16 PM
|
|
Damn, that reminds me, Christmas is comin' up!
|
|
|
Full Member
|
|
Dec 17, 2008, 06:40 AM
|
|
Originally Posted by MarkwithaK
Um hello....paper clip necklaces.
Ever since the eco-safety-tree-hugger crowd got rid of the original removable soda can pull-tab, I've resorted to using paper clips to decorate with. Don't know what I'll do if they get rid of those. :)
|
|
|
New Member
|
|
Dec 17, 2008, 03:06 PM
|
|
Egg shells ! You can color them and their recyclable
|
|
|
New Member
|
|
Dec 21, 2008, 02:41 PM
|
|
Hello guys,
I have the same issue, same furnace too. I have, for now, gotten it to stay lit, but the air is not hot, its luke warm at best. How can I increase the temperature of the furnace? Its 58 degrees in my house, and the air coming out of the vents is about 70 degress F. Any idea how to adjust the gas pressure screw either? Thanks
|
|
|
New Member
|
|
Dec 21, 2008, 05:44 PM
|
|
Read the entire Answer from page one hope it solves your problem
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Truck won't fire up
[ 7 Answers ]
I have a 1971 International Harvester 1110 Pickup Truck it turns over just fine but will not fire up, just replaced all spark plug wires and spark plugs still won't fire up. I am at a lost here any suggestions
Car won't fire up
[ 1 Answers ]
I am having problems starting my peugeot 106, it turns over but won't fire up. I have had a new crankshaft sensor, coil pack and ignition switch, can anyone help please..
95 civic won't fire
[ 1 Answers ]
My 95 civic won't start I'm getting fuel, spark, but it just keeps turning over but doesn't fire. It crunk up and ran for a little bit the other day and thought I had it fixed but went out the othe rday and it doesn't do any thing but just turn over any suggestions
Main gas won't fire
[ 1 Answers ]
Heil 7000 High Eff
Purge blower turns on
Pilot fires, main gas will not open / fire or rather honeywell (VR82041075) MV won't open. Electronic board MV output voltage is what to valve? No manual.
Module HQ1005962EX
Troy Bilt won't Fire
[ 4 Answers ]
Troy Bilt Model #3AQ609G063, 18hp B/S engine Twin II (model # for engine is42A707). I replaced the starter,solenoid, and it has a new battery. When I turn the key nothing. I jump the solenoid and the starter turns. I jump the starter and it turns. There is plenty of gas getting to the carb but, no...
View more questions
Search
|