Moentrol 3 function transfer valve shower & body spray diagram

gmaso Posts: 1, Reputation: 1

New Member

Dec 7, 2008, 10:23 AM

Moentrol 3 function transfer valve shower & body spray diagram

Need an installtion diagram for a shower with 4 body sprays ( 2 on each side) using a
Moentrol Model 3320 transfer valve.

Milo Dolezal Posts: 7,192, Reputation: 523

Plumbing Expert

Dec 7, 2008, 11:30 AM

Is what the trim looks like ?

Attached Images

connor11 Posts: 1, Reputation: 1

New Member

Mar 28, 2010, 05:21 PM

Yes

Add your answer here.

Check out some similar questions!

Moentrol Pressure Balance Rough-In Valve [ 1 Answers ]

I just installed a Moen 3570 Moentrol Pressure Balance Rough-In Valve for the shower and afterwards noticed that the amount of force required to pull the handle out is (in my opinion) quite excessive. It feels like there is a strong suction force that needs to be overcome each time its pulled out...

Replacing shower/tub valve body [ 2 Answers ]

I am remodeling my bathroom. I need to replace the shower/tub valve body. My galvanized pipes are rusting out. I have a three handle system. Hot, cold and diverter. I have two bathrooms which are built back to back. I have one set of incoming water lines. A previous owner repiped and brought...

Shower valve body upside? [ 6 Answers ]

My water supply comes into the shower valve body from above, not from below. Can the internal diverter be removed and installed in the opposite direction?

Shower valve body [ 1 Answers ]

I'm installing a new shower in an addition and purchased a new shower kit from Price Pfister. The shower valve is going into a 2x4 wall. The question I have is do they make different sizes of valve bodies because the one I have, when installed according to instructions, will only allow for about...