Ask Experts Questions for FREE Help !
Ask
    milllergirl's Avatar
    milllergirl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2008, 09:14 PM
    Why is my furnace not blowing heat when in auto?
    Hello,
    I turned on my heat this year and worked great. For the last couple days I haven't heard the heat kick in. I hit the reset switch and it kicked on and then went off, haven't heard it again. I turned the heat on fan. The fan kicks on right away but seams to be blowing out cold air not warm. When I turn it on auto, the heat does not kick in at all. Auto is what it is usually set on. The furnace not even a year old.

    Thanks Lots
    Millergirl
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 14, 2008, 10:39 PM
    Since the furnace is not one year old yet I am sure it is still uinder warranty. Before you mess with it call the company that installed it and have them do the repair for free.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why does my furnace blows out cold air when it should be blowing out hot air? [ 7 Answers ]

Why does my furnace blows out cold air, when it should be blowing hot air?

Bryant furnace blowing cold air and pilot won't lite [ 1 Answers ]

Hello, I purchased a Bryant gas furnace about 10 yrs ago. When I woke up this morning it was blowing cold air. My brother went down and looked at it and there was a red "led" light flashing on/off when he tried to get it to start back up. It was liting but now it isn't. Please help! :confused:

Not getting heat from my furnace [ 1 Answers ]

:eek: The thermostat is set for 70 degrees. The room temperature is 63 degrees. I went outside to check the furnace and it is running. The fan is not running and there is no heat. I replaced the thermostat and I get the same results.

No heat and furnace not run at all. [ 4 Answers ]

My heater does not come on and I don't hear the igntion click when I turn on the heater. The a/c and the fan works fine when turn on, but no heat. Silent. Could this be a faulty INTERMITTENT PILOT or a bad ignition moduel(circuit board). My furnace is equip with the electronic ignition...

View more questions Search