Ask Experts Questions for FREE Help !
Ask
    FranMac's Avatar
    FranMac Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 21, 2008, 10:42 AM
    Not getting heat from my furnace
    :eek: The thermostat is set for 70 degrees. The room temperature is 63 degrees.
    I went outside to check the furnace and it is running. The fan is not running and there is no heat. I replaced the thermostat and I get the same results.
    Eric D's Avatar
    Eric D Posts: 98, Reputation: 4
    Junior Member
     
    #2

    Jan 21, 2008, 10:57 AM
    FranMac,

    What are you seeing outside that makes you think the furnace is running other then the blower? Do you feel heat coming from the exhaust outside or just air?

    Eric D

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No heat and furnace not run at all. [ 4 Answers ]

My heater does not come on and I don't hear the igntion click when I turn on the heater. The a/c and the fan works fine when turn on, but no heat. Silent. Could this be a faulty INTERMITTENT PILOT or a bad ignition moduel(circuit board). My furnace is equip with the electronic ignition...

York Stellar Gas furnace Blower comes on NO heat [ 2 Answers ]

I am at a loss, furnace has a auto ignition, has tried to restart unit, but pilot does not appear to be one, air blows out of the vents, but no heat. :confused:

Oil furnace Blower runs no heat [ 9 Answers ]

I am having a intermintant problem with my furnace, I came home the blower was on no heat , I checked the themostat setting - ficked the service switch off and on a couple of times- burner started, I can hear the burner when it comes on, the furnace ran all day without problem I wake in the night...

York furnace - No ignition,no heat [ 4 Answers ]

I have a York Gas Furnace (model# P2MPD14W08001B, 12yrs old) giving out no heat. I did basic troubleshooting and realised system was not igniting; replaced ignitor (changed original 4-5 years ago) - fired up initially and then went out after running for about 30 minutes. I cleaned the flame sensor...


View more questions Search