Ask Experts Questions for FREE Help !
Ask
    ogulin123's Avatar
    ogulin123 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 4, 2008, 04:20 PM
    How to fix dishwasher stuck in clean cycle
    Kenmore dishwasher model# 66516034403 stuck in clean cycle. Haw I can reset mashine
    To work again.
    Thank you in advance
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 30, 2008, 03:12 AM
    Replace timer

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I safely clean my dishwasher drain? [ 6 Answers ]

For quite awhile now I have noticed a strong smell coming from my dishwasher, it happens at the beginning of the cycle. It is sort of like a rotten egg smell. I noticed that there is a little water in the very bottom of the dishwasher after I run it, I'm not sure how long the water has not been...

Kenmore Elite dishwasher stuck on "clean" [ 1 Answers ]

Our Kenmore Elite dishwasher is about 2 years old, and it is stuck on "clean." This happened once before and the repairman had told me an easy way to reset it which involved pressing a couple of buttons a couple of times. Unfortunately, I've forgotten what to do!! My warranty is expired. Can...

Washer cycle knob broke clean off! [ 1 Answers ]

I have a kenmore stacked washer/dryer. Not sure the model number as I am not at home right now. Anyway, as a casualty of moving I broke the knob/shaft off the washer cycle timer. How do I replace or repair this and how much does a new knob/assy cost roughly? Thanks for any help/advice...

Main clean stuck [ 4 Answers ]

I live in a 1963 houes with 4 stacks and each with a clean out. The prior owner obviously never used the clean outs because they have 3 layers of paint on them. I am unable to open any of the clean outs and I have two drains that will not empty on the first floor. Any trick besides brunt force to...

Furnace stuck in the BLOWER CYCLE? [ 2 Answers ]

I have an older Reclaimer 80 furnace, it is stuck with the blower on, and the burners or not igniting, is there a way to reset the system? - I have shut power off for a couple hours and it starts back up right were it left off. Also I can't shut it down at the thermostat, that has no effect on the...


View more questions Search